How to Detail the Exterior of Your Car 

»Posted by on Mar 16, 2018 in Car | 0 comments

A proper car detailing doesn’t only involve cleaning, washing and wiping. When you do car detailing, every part of the car should be cleaned to make it look like the way it did when you first bought it. So the cleaning process involves cleaning the interior and then the exterior. In this article, we will show you how exterior detailing Hawaii is done. You can do this the DIY way, so don’t worry.  

Car

Step 1 

The first step when cleaning the exterior of your car is washing the entire exterior surface. Prepare the car to be washed. Get the bucket and fill it with water. Read the instructions on the soap’s label before you add the car wash soap. Soak the car wash mitt. If there are spots that have been building up in your vehicle; spray it with bug and tar remover. Let it sit for few minutes before you proceed with the rinsing.  

Step 2 

Use the high-pressure hose to wash the entire exterior of the car. The hose will remove the grime and dirt. If you plan on opening the hood, make sure every electronic is covered in plastic bags. Spray the underside of the vehicle and the wheel wells. Start spraying on the car’s top and work your way down.  

Step 3 

Next, begin scrubbing the wheels. Apply the wheel cleaner, and make sure you use the safe one. There are particular wheel cleaner that works best with a particular wheel material. Don’t miss any spot while cleaning the wheels. Do this one at a time so you don’t have to go back. Let the cleaning spray sit for 30 seconds so it will effectively remove the grime and dust. Wash the sides of the wheel using a wheel brush. After that, rinse the wheel. Rinse well until you don’t see any foamy water or soap.  

Step 4 

The next thing to do is applying the tire dressing into the tires. Make sure the tire is dry. Use a separate cloth when doing this. Spray the tire dressing into the applicator pad and wipe it on the tires. This will leave the tires looking clean and shiny. Make sure that you let it dry before you use the vehicle again.  

Step 5 

It’s now time to clean the car’s engine components. Use a degreaser when cleaning the grimy components under the car’s hood. Once the cleaner has soaked in, blast the dirt off with a hose. Repeat if necessary until the engine bay is totally clean. The rubber parts should be applied with rubber protectant so keep them flexible and soft.  

Step 6 

Get your wash mitt and scrub the exterior of your car. Scrub the panel one by one. Make sure you completely clean the window or panel before you move with the next one. All of the car body parts should be cleaned and scrubbed, especially the parts where the grime and brake dust are building up. Rinse the exterior thoroughly.  

read more

Common Electrical Repairs

»Posted by on Jul 29, 2017 in Electrical Repairs | 0 comments

It is not easy to avoid electrical problems in the house. Usually, these problems happen by accident and are hard to avoid. Although, it is the way you deal with it is what matters. If you just leave it broken for a long time, then it may worsen the problem and create problems that were not even present when it first broke. It is important to know if the object or appliance is broken because it should be repaired as soon as possible. A lot of experts suggest to quickly bring what is broken to avoid further damage to the appliance or wire. Here are some of the common electrical repairs to look out for to fix it if ever this happens in the house.

Common Electrical Repairs

One of the most common electrical repairs is for knob and tube wiring. Knob and tube wiring is a practice that can be dated back all the way to the 1950s. Even if it is an old practice, it is still evident in homes nowadays. One reason it has problems is that the usual usage of electricity now is greater than that of before. Due to our world revolving around technology we tend to use more electricity than before, and the knob and tube wiring cannot take it. Since it is brittle, when it is overused it could easily lead to fires that may happen at any moment. If you still have this type of wiring in your home, it would be best to change it as soon as possible to avoid these types of repair.

Another common electrical repair would be exposed wires. This is very common, and these wires get exposed because they are not properly protected. If you come in contact with these exposed wires, they could seriously shock you. Also, these exposed wires would stop the flow of electricity in those areas. Electricians would warn you about these, but if you call them, then they would easily be able to deal with this type of problem.

Improper use of extension cords is also another common electrical repair. Sometimes the use of extension cords is mistaken as a permanent solution to electrical problems. However, experts would say that they are only a temporary solution that will not be good long term. A lot of people use extension cords instead of adding sockets to their house. Although this would lead to electric shocks that would create a hazard in your home when it should be a haven for the people living in it. If you need more sockets, calling an electrician to add sockets would be the best thing to do and not use extension cords.

These are some of the common repair problems that electricians encounter in homes. Even if you have a temporary solution to a problem why not settle for the permanent? Going for the permanent is way better and safer than the temporary solutions even if it may cost more. Truly, electrical repair is significant and should be dealt with as soon as possible because it is better to be safe rather than sorry.

read more

4 Signs You Need a New Air Conditioning Unit 

»Posted by on Jun 28, 2017 in Air Conditioning Unit | 0 comments

When the temperatures begin to rise because of the start of hot summer months, one thing that a lot of homeowners do is to turn on their air conditioning unit. However, some probably think this time that they need to purchase a new one. The question is, how would you know when really is the right time to buy one? In this article, you will be able to learn the common signs that mean you already need a new air conditioning unit for your home or maybe your old unit just needs a professional air conditioning repair.

Air Conditioning Unit

Generally, an air conditioning unit is not going to stop operating without showing any signs of malfunctions. Therefore, rather than sitting and simply wondering if your air conditioner is going to last a bit longer, here are some good signs that might mean you need to get a new one.

1. Your Air Conditioning Unit is More Than Ten Years Old

Most of the time, an air conditioning unit will not last more than 10 years. Therefore, if your air conditioning unit is nearing the one decade mark or you already know by now that it’s more than 10 years old, it might be the right time to replace it. Basing on its age, try to look for other indications below too. That will actually give you a reliable indication on whether your air conditioning unit is still good to go or it might be the perfect time you should buy a new one.

2. Your Air Conditioning Unit Smells

Most air conditioner experts say that if you are noticing a smell that is coming from your air conditioner, it might mean that there is trouble ahead. Possibly, that acrid odor can indicate that the wire insulation is burned or there has been a shortage in the electricity. In addition to that, it can also mean that the wiring has much higher resistance.

3. Strange Noises

Does your air conditioner seem to be making too much strange noises coming from the inside? This could mean that your air conditioner is already on its way out. Noises such as growling or rattling could mean that the belts of the fan might be broken, it has defective motor, or maybe you have a certain part of your air conditioning unit that has been loose already. In addition to that, if you hear a clicking noise, it could also mean that the capacitor or relay is trying to turn on. If the air conditioning unit is running but it cannot cool anymore, chances are that the condenser of the unit has already failed or the Freon level went down.

4. Circuit Breaker Tripping Constantly

If your unit constantly trips your circuit breaker, it can be a sign that your wiring has been already overloaded, which means that some electrical surges are taking place. When you happen to notice this, it is strongly recommend that you have the unit’s wiring checked out by a professional and experienced air conditioner service provider in order to avoid further issues.

Whenever you want to purchase a new air conditioner or want to repair your old unit, always make sure that you only hire a professional air conditioner service provider.

read more